Speeding and Police radar

Curtisloew
Newbie
Newbie
Posts: 14
Joined:

Speeding and Police radar

Unread post by Curtisloew on

Can a Police vehicle approaching traffic (single lane each way) target multiple vehicles.

Should the officer lock the speed (on the device) on the first vehicle, before proceeding to target the vehicle behind the first vehicle?
If the Officer doesn't lock the speed, are they able to determine what the speed is of other approaching vehicles?

Is it possible for an Officer, who is mobile and targeting approaching traffic, to pull over 3 - 4 vehicles at one time?

Thoughts please.


jsherk
High Authority
High Authority
Posts: 1722
Joined:

Unread post by jsherk on

Most vehicle mounted radar is designed to be used while patrol vehicle is moving, and can target two vehicles at once (when in fastest mode), the STRONGEST target signal and the FASTEST target signal. The unit has to be in Fastest mode, but it will display the two different speeds (as well as patrol speed) on the display.

No they do not need to LOCK in any speed to get both readings.

The radar does NOT tell the officer which vehicle is the fastest and which is the strongest, so the officer has to make this determination by what they see. If there are more than two vehicles on the road, then it would be very hard to pick out which vehicle is giving which reading as a vehicle further away could be going faster than multiple closer vehicles.

A misconception is that the bigger object (like a truck) will have a stronger signal than a smaller object (like a car), but this is only true if they are side by side. If a smaller object is closer to the radar than a larger object, the closer object will have the stronger signal.

If one officer has multiple vehicles pulled over, then most likely there is another officer in another stationary vehicle with the radar telling the second officer which vehicles to pull over.
+++ This is not legal advice, only my opinion +++


Post Reply

Return to “Failing to remain at the scene of a collision”